Vintage furniture is one of the hottest home decor trends of this year.
You don’t have to shell out on expensive brand new pieces to make the most of it. You can give yours a new lease of life by restoring it.
Before you do so, read our handy guide. Here, we’ll give you some valuable advice on antique furniture restoration, cleaning, and finishing.
Things to Remember During Antique Furniture Restoration
Bring your old furniture back to life with these tips.
1. Safety First
When you’re carrying out any antique furniture restoration, you must take safety measures.
While it may seem like a simple and straightforward household project, you could easily harm yourself if you’re not careful.
Harsh cleaning chemicals can cause irritations or even burns to the skin. Protect yourself with gloves and long-sleeved shirts.
You may even want to wear a mask to filter out any fumes. However, it’s best to carry out your restoration in a well-ventilated area to avoid the risk altogether.
Safety glasses will also protect your eyes from any stray splinters of wood.
Before you apply any cleaning solution to your antique furniture, make sure to test a small amount on an inconspicuous spot.
A small amount of white spirit on a clean cloth should be enough to remove most stains. For sticky residue, lemon juice is a surprisingly effective cleaning solution, too.
For stubborn markings, apply furniture wax to the affected area. Give it time to soak into the wood, then buff it with a clean cloth.
Be sure to change or rinse your cloth as it gets dirty to avoid rubbing dirt back into the surface.
3. Remove Mold and Mildew
If your furniture has developed mold or mildew, there are many methods you can use to remove it.
The first is a mixture of 10% ammonia and water. This can be applied with a spray bottle and simply wiped off with a cloth.
If that doesn’t work, mix a quarter cup of bleach and a tablespoon of laundry detergent with a gallon of water. This can be applied in the same way.
4. Use Steam to Fix Dents
It’s normal for antique chairs to have a few dents after many years of use.
There’s an easy way to fix these dents without buying any expensive products, tools or equipment. All you need is an iron.
First, you’ll have to strip any polish or other finish from the surface of the wood. Then, take a damp cloth and place it over the dent. With your iron on a low setting, hold it down on top of the cloth.
The steam will cause the wood to swell, forcing the dent out.
5. Sand Before Refinishing
The final touch is to refinish your furniture.
You can either find something to replicate the old look or get creative with something new. No matter which type of finish you choose, make sure you strip and sand the wood enough to provide a sleek, professional appearance.
Find Great Antique Furniture
Some antique furniture is best left in its original state.
If you choose the wrong piece to restore, you could end up inadvertently reducing its value significantly.
Do your research to find out how much your piece is worth before starting any project. That way, you can avoid any mishaps.
To do that, you can get your antiques appraised by a professional.